Skip to content

Basler Standard Light Bar-45x200-SWIR#

Basler Standard Bar Lights can be used in various applications, e.g., for bright field lighting applications in the short-wave infrared (SWIR) light range.

Basler Standard Light Bar

Info

The photo may slightly differ in appearance from the actual product.

Key Features#

  • Internal LED controller with 2 operating modes
  • Compatible with Basler SLP Strobe Controller (up to a maximum output current of 2 A in continuous operation)
  • Preconfigured hardware components
  • Various sizes and wavelength ranges

General Specifications#

Basler Standard Light Bar-45x200-1050 Basler Standard Light Bar-45x200-1200 Basler Standard Light Bar-45x200-1300 Basler Standard Light Bar-45x200-1450 Basler Standard Light Bar-45x200-1550 Basler Standard Light Bar-45x200-1650
Order No. 2200001590 2200001591 2200001592 2200001593 2200001594 2200001595
Peak Wavelength 1050 nm 1200 nm 1300 nm 1450 nm 1550 nm 1650 nm
Luminous Area 45 x 200 mm 45 x 200 mm 45 x 200 mm 45 x 200 mm 45 x 200 mm 45 x 200 mm
Risk Class (according to IEC 62471) Group 1 Group 1 Group 1 Group 1 Group 1 Group 1
Basler Standard Light Bar-45x200-x
Conformity CE (includes RoHS), FCC, UKCA
Certificates for your light model
For more information, see the Compliance section of the Basler website.

Radiant Intensity#

Radiant Intensity (W/sr)
Basler Standard Light Bar-45x200-1050 34.6
Basler Standard Light Bar-45x200-1200 7.5
Basler Standard Light Bar-45x200-1300 6.9
Basler Standard Light Bar-45x200-1450 6.0
Basler Standard Light Bar-45x200-1550 3.7
Basler Standard Light Bar-45x200-1650 3.2

Electrical Specifications#

Info

For the recommended electrical requirements when using this light in combination with the SLP strobe controller, see here.

Basler Standard Light Bar-45x200-x
Required Power for Voltage Control Mode
(45x200-1050)
24 VDC / 45 W
Required Power for Voltage Control Mode
(45x200-1200)
24 VDC / 39 W
Required Power for Voltage Control Mode
(45x200-1300/1450)
24 VDC / 38 W
Required Power for Voltage Control Mode
(45x200-1550)
24 VDC / 37 W
Required Power for Voltage Control Mode
(45x200-1650)
24 VDC / 35 W
Required Current for Current Control Mode 3000 mA
Recommended max. LED Current for Strobe Mode
(25 % Duty Cycle, 20 ms Pulses)
4800 mA
Recommended max. LED Current for Strobe Mode
(1 % Duty Cycle, 5 ms Pulses)
7200 mA

Mechanical Specifications#

|

Bar Light Dimensions#

Basler Standard Light Bar-45x200-x

Connector Pin Numbering#

Info

SWIR lights are equipped with an M12 5-pin connector. For more information about the installation, see here.

Info

The pin assignment of the light's connector differs depending on whether you want to use the internal or an external controller. For more information, see the respective tables in the Installation chapter.