Mounting Instructions (ace USB 3.0)#

This topic provides instructions on how to mount Basler ace classic USB 3.0, Basler ace U USB 3.0, and Basler ace L USB 3.0 cameras in your system.

When mounting one of these cameras in your system, you must tighten the screws in a certain order. This ensures optimum alignment of the camera.

Depending on whether you use M2 or M3 screws, the order for tightening the screws varies.

Info

  • Basler ace L USB 3.0 cameras use M3 screws of different lengths. These cameras can't be mounted using M2 screws.
  • The following illustrations show cameras with C-mounts. The mounting instructions apply, however, also to cameras with CS-mounts.

Using M2 Screws#

To tighten the M2 screws:

  1. Tighten the screws for the mounting screw holes (a) in the figure below.
  2. Tighten the screws for the mounting screw holes (b) in the figure below.

Tightening Sequence When Using M2 Screws

Using M3 Screws#

To tighten the M3 screws:

  1. Tighten the screws for the mounting screw holes (a) in the figure below.
  2. Tighten the screw for the mounting screw hole (b) in the figure below.

Tightening Sequence When Using M3 Screws