Basler 2.5GigE Interface Card, 1 Port#
Info
- On Windows, to operate this interface card, you must either install a compatible driver from the Microsoft Driver Store (recommended) or use the correct Intel driver for the Intel I226-V Ethernet controller. You can download the driver from the product page of the 2.5GigE Interface Card, 1 Port, under Specifications / Software. Alternatively, you can also download the latest driver from the Intel website.
- On Linux, the interface card is usually natively supported by the Linux kernel (for example via the igc driver).
Key Features#
- GigE Vision-certified
- Autonegotiation
- IEEE 1588 Precision Time Protocol (PTP) clock synchronization
- Wake on LAN (WoL) and UEFI support
- Automatically detected by pylon through shared MAC address range
General Specifications#
| 2.5GigE Interface Card, 1 Port | |
|---|---|
| Order Number | 2200002427 |
| Ethernet Controller | Intel KTI226V |
| Number of Ports | 1 |
| Port | RJ45 |
| Data Rate | 10 Mbps / 100 Mbps / 1 Gbps / 2.5 Gbps |
| Additional Low-Profile Bracket | No |
| PCIe Version and Lane | 3.1 x1, 5.0 GT/s (compatible with x4/x8/x16) |
| Supported Standards | IEEE 802.1bz (2.5GBASE-T and 5GBASE-T; card operates up to 2.5GBASE-T) IEEE 802.3ab (1000BASE-T Gigabit Ethernet) IEEE 802.3u (100BASE-TX Fast Ethernet) IEEE 802.3x (Ethernet flow control) |
| Additional Functions | IEEE 1588 Precision Time Protocol (PTP), UEFI, Wake on LAN (WoL), Jumbo Frame (up to 9.2 kB) |
| Power Supply | via PCIe slot |
| Conformity | CE, FCC, RoHS, KC Certificates for your 2.5GigE Interface Card For more information, see the Compliance section of the Basler website. |
| Power Consumption | Max. 2.0 W |
| Maximum Packet Size for Jumbo Frames | Up to 9.2 kB |
Jumbo Frames
If you want to use the maximum packet size for jumbo frames, set the network adapter to its maximum value as described in the Network Configuration (GigE Cameras) topic. Also set the GevSCPSPacketSize parameter to its maximum size. Bear in mind that most Basler ace 2 cameras only support a packet size of up to 8192 bytes.
LED States#
| State at 2.5 Gbps | State at 1 Gbps | State at 100 Mbps/10 Mbps | Meaning | |
|---|---|---|---|---|
| Link LED | Static green | Static orange | Off | Connection to host established |
| Network LED | Flashing green | Flashing green | Flashing green | Network traffic is active |
GigE Interface Card Dimensions#
Environmental Requirements#
The Basler GigE Interface Cards are specified for indoor use only.
| Housing Temperature During Operation | 0–70 °C (32–158 °F) |
| Housing Temperature During Storage | -40–85 °C (-40–185 °F) |
| Humidity During Storage | Maximum 90 % relative humidity, non-condensing at 35 °C |
Allow sufficient air circulation to keep the temperature during operation within the specified range. Additional cooling devices are not normally required, but should be provided if necessary.