Skip to content

Basler Opto-I/O Cable, HRS 6p/open, P#

Input/Output (I / O) cable connecting only to the opto-isolated I/O pins (IN, OUT, Opto Ground) of the camera's 6-pin connector.

Basler Opto-I/O Cable, HRS 6p/open, P

Info

The cable is suitable for the following camera models:

  • ace USB 3.0
Order Number Cable Length
2000034086 10 m

Cable Drawing#

Cable Drawing

Wiring Information#

Pin Number Wire Color Function
1 n/a n/a
2 Brown Opto-isolated IN (Line 1)
3 n/a n/a
4 Yellow Opto-isolated OUT (Line 2)
5 White/Green Opto-isolated I/O Ground
6 n/a n/a

Physical Specifications#

Camera-side Connector Hirose 6 pin [HR10A-7P-6S (73)]
Host-side Connector None, open end
Cable Cross-section 2 × 2 × 0.14 mm² (close to AWG 26)
Cable Diameter 4.9 mm max.
Wire Insulation PVC
Outer Jacket PVC
Color Outer Jacket Blue
Minimum Bending Radius 34.3 mm (7 x cable diameter), fixed installation
Maximum Bending Cycles None (fixed installation only)
Suitable for Drag Chain Applications No
Suitable for Robotics Applications No

Electrical Specifications#

Maximum Operating Voltage See the Basler Product Documentation for the power requirements of your camera.
Wire Resistance ≤142 Ω/km

Environmental Specifications#

Operating Temperature Range -25–80 °C, not moving

Plug Specifications#

Durability >1000 mating cycles
Contact Resistance 10 mΩ max.
Contact Plating Silver
Protection Rating IP40
Plug Insulation Material Polyamide/PBT

General Information#

Conformity CE (includes RoHS)
Certificates for your cable
For more information, see the Compliance section of the Basler website.
Warranty 3 years

Read the topic about your camera model before connecting the cable to the camera. You can find your camera topic in the Area Scan Cameras section under "Models".

Back to top