Basler I/O Cable, HRS 6p/open, P#
Info
The cable is suitable for the following camera models:
- boost V
| Order Number | Cable Length |
|---|---|
| 2200001239 | 10 m |
Cable Drawing#
Wiring Information#
| Pin Number | Wire Color | Function |
|---|---|---|
| 1 | Brown | Input 1 |
| 2 | Pink | Not connected |
| 3 | Green | Output 1 |
| 4 | Yellow | I/O Ground |
| 5 | Gray | I/O Ground |
| 6 | White | I/O Ground |
For more details, see the respective camera documentation.
Physical Specifications#
| Camera-Side Connector | Hirose, 6 pin [HR10A-7R-6S (73)] |
| Host-Side Connector | None, open end |
| Cable Cross-Section | 3 x 2 x 0.14 mm² (close to AWG 26) |
| Cable Diameter | 5.8 mm |
| Wire Insulation | PVC |
| Outer Jacket | PVC |
| Minimum Bending Radius | 34.8 mm (6 x cable diameter), fixed installation |
| Maximum Bending Cycles | None (fixed installation only) |
| Suitable for Drag Chain Applications | No |
| Suitable for Robotics Applications | No |
Electrical Specifications#
| Test Voltage | 1200 VDC |
| Wire Resistance | ≤142 Ω/km |
Environmental Specifications#
| Operating Temperature Range | -25–80 °C, not moving |
Plug Specifications#
| Durability | >1000 mating cycles |
| Contact Resistance | max. 10 mΩ |
| Contact Plating | Silver |
| Protection Rating | IP40 |
| Plug Insulation Material | Polyamide/PBT |
General Information#
| Conformity | CE (includes RoHS) Certificates for your cable For more information, see the Compliance section of the Basler website. |
| Warranty | 3 years |
Read the topic about your camera model before connecting the cable to the camera. You can find your camera topic in the Area and Line Scan Cameras section under "Models".