Skip to content

Basler Power-I/O Cable, M8 6p/open, P#

Power-I/O cable with M8 6-pin connector and open end.

Basler Power-I/O Cable, M8 6p/open, P


The cable is suitable for ace 2 and boost cameras.

Order Number Cable Length
2200000315 5 m
2200000296 10 m

Cable Drawing#

Cable Drawing

Wiring Information#

Pin Number Wire Color Function
1 Brown AUX power (not for ace 2 R USB, Basic product line)
2 White Opto-coupled I/O input, Line 1
3 Blue Ground for opto-coupled I/O
4 Black GPIO I/O, Line 2
5 Gray GPIO I/O, Line 3
6 Pink Ground for AUX power and GPIO

Shielding Installation#

Component Form Function
Shell Braid Shield

Physical Specifications#

Camera-side Connector M8 6-pin, male plug, A standard coding
Host-side Connector None, open end
Cable Cross-section 6 × AWG 24 (6 × near 0.2 mm²)
Cable Diameter 5.5 mm
Wire Insulation Cable Shielding PVC Tinned braided copper, min. 80 % coverage
Outer Jacket PUR, black, halogen-free
Minimum Bending Radius 55 mm
Suitable for Drag Chain Applications No
Suitable for Robotics Applications No

Electrical Specifications#

Maximum Operating Voltage 30 VDC AC/DC
Maximum Rated Current 1 A
Wire Resistance Power-I/O cable M8 6-pin open, 5 m: 0.5 Ω
Power-I/O cable M8 6-pin open, 10 m: 1 Ω

Environmental Specifications#

Operating Temperature Range -25–80 °C, not moving

Plug Specifications#

Contact Plating Ni/Au
Protection Rating IP67 in locked position

General Information#

Conformity CE (includes RoHS), REACH
Certificates for your cable
For more information, see the Compliance section of the Basler website.
Warranty 3 years

Read the topic about your camera model before connecting the cable to the camera. You can find your camera topic in the Area Scan Cameras section under "Models".

The installation is explained in the Hardware Installation (CXP-12 Cameras) topic.