Skip to content

Line Status#

The Line Status camera feature allows you to determine the status (high or low) of one or all I/O lines.

Using the Feature#

Determining the Status of an I/O Line#

To determine the status of an I/O line:

  1. Set the LineSelector parameter to the desired I/O line.
  2. Get the value of the LineStatus parameter.
    This parameter is read-only.

A value of false (0) means that the line's status was low at the time of polling.

A value of true (1) means the line's status was high at the time of polling.

Info

If the Line Inverter feature is enabled, the LineStatus parameter value may not reflect the actual status of the line:

  • For input lines or GPIO lines configured for input, the camera inverts the LineStatus parameter value. A true parameter value changes to false, and vice versa.
  • For output lines or GPIO lines configured for output, the camera may not invert the LineStatus parameter value. Check this against your camera.

Determining the Status of All I/O Lines#

To determine the current status of all I/O lines, read the LineStatusAll parameter. The parameter is reported as a 64-bit value.

Certain bits in the value are associated with the I/O lines. Each bit indicates the status of its associated line:

  • If a bit is 0, the status of the associated line is currently low.
  • If a bit is 1, the status of the associated line is currently high.

Which bit is associated with which line depends on your camera model.

Info

If the Line Inverter feature is enabled, the camera inverts the LineStatusAll parameter value. All 0 bits change to 1, and vice versa.

Line Status and I/O Status#

GPIO Line Configured as Input#

If your camera has a GPIO line and that line is configured as input, the relation between its input status and the LineStatus parameter is as follows:

Input Status LineStatus Parameter Value
Input open (not connected) True
Voltage level low False
Voltage level high True

This means that the line logic is positive.

GPIO Line Configured as Output#

If your camera has a GPIO line and that line is configured as output, the relation between its output status and the linestatus parameter depends on your camera model.

Opto-Coupled Input Line#

If your camera has an opto-coupled input line, the relation between its input status and the LineStatus parameter is as follows:

Input Status LineStatus Parameter Value
Input open (not connected) False
Voltage level low False
Voltage level high True

This means that the line logic is positive.

Opto-Coupled Output Line#

If your camera has an opto-coupled output line, the relation between its output status and the LineStatus parameter is as follows:

Output Status LineStatus Parameter Value Electrical Status
0 (e.g., user output value set to false or flash window signal low) True Voltage level highc
1 (e.g., User Output Value set to true or Flash Window signal high) False Voltage level low

This means that the line logic is negative.

Specifics#

Info

For information about the line status on GPIO lines configured as input and on opto-coupled I/O lines, see the tables above.

Show all camera models

Camera Model Output Status Relation LineStatusAll Bit-to-Line Association
a2A640-240gmSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A640-240umSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1280-80gmSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1280-125umSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-51gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-51gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-51gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-51gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-160ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-160ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-160umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-160umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-165g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A1920-165g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2048-35gmSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2048-110umSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2440-98g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2440-98g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-23gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-23gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-23gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-23gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-75ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-75ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-75umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-75umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-105g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-105g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-120cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-120cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-210cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2448-210cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2560-20gmSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2560-70umSWIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-22gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-22gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-22gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-22gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-60ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-60ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-60umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2590-60umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-20gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-20gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-20gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-20gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-64ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-64ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-64umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2600-64umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-14gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-14gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-14gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-14gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-14gmUV Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-48ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-48ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-48umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-48umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-48umUV Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-67g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-67g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-67g5mUV Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-86cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A2840-86cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-13gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-13gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-13gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-13gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-45ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-45ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-45umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A3840-45umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-9gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-9gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-9gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-9gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-30ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-30ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-30umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-30umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-44g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-44g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-67cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4096-67cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-12gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-12gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-12gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-12gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-40ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-40ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-40umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4200-40umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-5gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-5gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-5gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-5gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-18ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-18ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-18umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-18umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-27g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-27g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-42cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4504-42cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-6gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-6gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-6gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-6gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-20ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-20ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-20umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A4508-20umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-7gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-7gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-7gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-7gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-23ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-23ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-23umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-23umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-34g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-34g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-52cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5320-52cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-4gcBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-4gcPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-4gmBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-4gmPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-15ucBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-15ucPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-15umBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-15umPRO Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-22g5cBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-22g5mBAS Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-35cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
a2A5328-35cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA640-121gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA640-300gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA640-300gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA640-750uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA640-750um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA720-290gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA720-290gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA720-520uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA720-520um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA800-200gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA800-200gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA800-510uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA800-510um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1280-60gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1280-60gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1300-60gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1300-60gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1300-60gmNIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1300-75gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1300-75gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1300-200uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1300-200um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1440-73gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1440-73gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1440-220uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1440-220um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1600-20gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1600-20uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1600-60gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1600-60gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1920-25gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1920-25gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA1920-25uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-25um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-40gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-40gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-40uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-40ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-40um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-40umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-48gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-48gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-50gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-50gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA1920-150uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-150um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-155uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-155ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-155um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA1920-155umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2000-50gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2000-50gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2000-165uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2000-165um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-25gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2040-25gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2040-25gmNIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2040-35gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2040-35gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2040-55uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-55um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-90uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-90um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-90umNIR Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-120uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2040-120um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-20gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2440-20gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2440-35uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-35ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-35um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-35umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-75uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-75ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-75um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2440-75umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2500-14gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2500-14gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA2500-14uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2500-14um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2500-20gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2500-20gcMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2500-20gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2500-20gmMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA2500-60uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA2500-60um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3088-16gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA3088-16gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA3088-57uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3088-57ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3088-57um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3088-57umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3800-10gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA3800-10gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 16 indicates Out1 status
Example: All lines high = 0b10000000000000001
acA3800-14uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA3800-14um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4024-8gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA4024-8gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA4024-29uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4024-29um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-11gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 is always 0
Bit 1 configures the status of Line 2
Bit 2 configures the status of Line 3
Example: All lines high = 0b110
acA4096-11gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA4096-30uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-30ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-30um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-30umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-40uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-40ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-40um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4096-40umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-8gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA4112-8gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA4112-20uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-20ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-20um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-20umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-30uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-30ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-30um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA4112-30umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA5472-5gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA5472-5gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
acA5472-17uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA5472-17ucMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA5472-17um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
acA5472-17umMED Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus true = voltage level higha
Output status 1 = LineStatus false = voltage level low
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Bit 3 indicates Line4 status
Example: All lines high = 0b1111
boA1936-400cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA1936-400cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA2448-250cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA2448-250cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA2832-190cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA2832-190cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4096-93cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4096-93cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4096-180cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4096-180cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4112-68cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4112-68cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4500-45cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4500-45cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4504-100cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA4504-100cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA5120-150cc Line Status feature not supported Line Status feature not supported
boA5120-150cm Line Status feature not supported Line Status feature not supported
boA5120-230cc Line Status feature not supported Line Status feature not supported
boA5120-230cm Line Status feature not supported Line Status feature not supported
boA5320-150cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA5320-150cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA5328-100cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA5328-100cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA6500-36cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA6500-36cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA8100-16cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA8100-16cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
boA9344-30cc Line Status feature not supported Line Status feature not supported
boA9344-30cm Line Status feature not supported Line Status feature not supported
boA9344-70cc Line Status feature not supported Line Status feature not supported
boA9344-70cm Line Status feature not supported Line Status feature not supported
boA13440-17cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA720-520uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA720-520um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA1280-54uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1280-54um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1440-220uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA1440-220um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA1600-60uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1600-60um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1920-15um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1920-30uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1920-30um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA1920-160uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA1920-160um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA2448-70uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA2448-70um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA2500-14uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA2500-14um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Example: All lines high = 0b11
daA3840-45uc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
daA3840-45um Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA720-290gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA720-290gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA1440-73gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA1440-73gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA1920-51gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
dmA1920-51gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
puA1280-54uc Line Status feature not supported Line Status feature not supported
puA1280-54um Line Status feature not supported Line Status feature not supported
puA1600-60uc Line Status feature not supported Line Status feature not supported
puA1600-60um Line Status feature not supported Line Status feature not supported
puA1920-30uc Line Status feature not supported Line Status feature not supported
puA1920-30um Line Status feature not supported Line Status feature not supported
puA2500-14uc Line Status feature not supported Line Status feature not supported
puA2500-14um Line Status feature not supported Line Status feature not supported
r2L2048-29gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L2048-58gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L2048-62cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L2048-62g5c Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L2048-172cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L2048-172g5m Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-14gc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-29gm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-42cc Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-42g5c Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-84cm Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L4096-84g5m Output status 0 (e.g., User Output Value set to false or Flash Window signal low) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L8192-200cm Output status 0 (e.g., User Output Value set to false) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111
r2L16384-120cm Output status 0 (e.g., User Output Value set to false) = LineStatus false = voltage level lowb
Output status 1 = LineStatus true = voltage level high
Bit 0 indicates Line1 status
Bit 1 indicates Line2 status
Bit 2 indicates Line3 status
Example: All lines high = 0b111

  1. This means that the line logic is negative.

  2. This means that the line logic is positive. However, the LineLogic parameter is not available for this camera model.

  3. An external pull-up resistor must be installed. Otherwise, the voltage level will be undefined.

Sample Code#

// Select a line
camera.LineSelector.SetValue(LineSelector_Line1);
// Get the status of the line
bool status = camera.LineStatus.GetValue();
// Get the line status of all I/O lines. Because the GenICam interface does not
// support 32-bit words, the line status is reported as a 64-bit value.
int64_t lineStatusAll = camera.LineStatusAll.GetValue();
INodeMap& nodemap = camera.GetNodeMap();
// Select a line
CEnumParameter(nodemap, "LineSelector").SetValue("Line1");
// Get the status of the line
bool status = CBooleanParameter(nodemap, "LineStatus").GetValue();
// Get the line status of all I/O lines. Because the GenICam interface does not
// support 32-bit words, the line status is reported as a 64-bit value.
int64_t lineStatusAll = CIntegerParameter(nodemap, "LineStatusAll").GetValue();
// Select a line
camera.Parameters[PLCamera.LineSelector].SetValue(PLCamera.LineSelector.Line1);
// Get the status of the line
bool status = camera.Parameters[PLCamera.LineStatus].GetValue();
// Get the line status of all I/O lines. Because the GenICam interface does not
// support 32-bit words, the line status is reported as a 64-bit value.
Int64 lineStatusAll = camera.Parameters[PLCamera.LineStatusAll].GetValue();
/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
_Bool status = false;
int64_t lineStatusAll = 0;
/* Select a line */
errRes = PylonDeviceFeatureFromString(hdev, "LineSelector", "Line1");
CHECK(errRes);
/* Get the status of the line */
errRes = PylonDeviceGetBooleanFeature(hdev, "LineStatus", &status);
CHECK(errRes);
/* Get the line status of all I/O lines. Because the GenICam interface does not */
/* support 32-bit words, the line status is reported as a 64-bit value. */
errRes = PylonDeviceGetIntegerFeature(hdev, "LineStatusAll", &lineStatusAll);
CHECK(errRes);
# Select a line
camera.LineSelector.Value = "Line1"
# Get the status of the line
status = camera.LineStatus.Value
# Get the line status of all I/O lines. Because the GenICam interface does not
# support 32-bit words, the line status is reported as a 64-bit value.
lineStatusAll = camera.LineStatusAll.Value

You can also use the pylon Viewer to easily set the parameters.