Skip to content

Circuit Diagrams (ace 2, boost)#

This topic provides sample circuit diagrams for connecting your Basler ace 2 USB 3.0 or Basler boost camera to external circuitry.

Info

  • For sample circuit diagrams of boost V cameras, click here.
  • For electrical requirements of your camera model, see your camera topic. You can find your camera topic in the "Models" section.

Opto-Coupled Input Line#

The following diagram shows a typical circuit using the opto-coupled input line (Line 1). As an example, a TTL or CMOS logic gate is used in the external circuit.

Opto-Coupled Input Line Circuit Diagram with a Typical External Circuit

GPIO Input Line#

The following diagram shows a typical circuit when a GPIO line is set to operate as an input. As an example, Line 2 is connected, and a TTL or CMOS logic gate is used in the external circuit.

GPIO Line Circuit Diagram with the GPIO Line Set as an Input and with a Typical External Circuit

The following diagram shows a different example of an external circuit using a GPIO line.

GPIO Line Circuit Diagram with the GPIO Line Set as an Input and with a Typical External Circuit

GPIO Output Line#

The following diagram shows a typical circuit when a GPIO line is set to operate as an output. As an example, Line 2 is connected.

GPIO Line Circuit Diagram with the GPIO Line Set as an Output and with a Typical Voltage Output Circuit