Basler Cable USB 3.0, Micro B sl/A, P, 8m#
The cable is suitable for the following camera models:
- ace 2 USB 3.0
- ace USB 3.0
|Order Number||Cable Length|
|USB 2.0||480 Mbps|
|USB 3.0||5 Gbps|
|Camera-Side Connector||Micro-B with screw lock|
|Host-Side Connector||Type A, USB-IF-compliant|
|Cable Diameter||8 mm max.|
|Minimum Bending Radius||125 mm, fixed installation|
|Maximum Bending Cycles||None (fixed installation only)|
|Suitable for Drag Chain Applications||No|
|Suitable for Robotics Applications||No|
|Maximum Operating Voltage||See the Basler Product Documentation for the power requirements of your camera.|
|Operating Temperature||70 °C max., not moving|
|UL Conformity (Raw Cable)||Yes|
NOTICE – Excessive force can damage the cable.
The following actions can damage the individual wires of the cable, which would result in a breakdown in the USB 3.0 data transmission:
- putting heavy loads on the cable
- mechanical shocks or strong vibration
- external influences like scratching or hitting
- bending with less than the minimum bending radius
Handle the cable with care and keep bending to a minimum, e.g., during installation.
When connecting the cable to the camera, consider that the position of the camera's USB 3.0 connector defines the direction the cable is guided within your installation.
Read the topic about your camera model before connecting the cable to the camera. You can find your camera topic in the Area Scan Cameras section under "Models".