Basler I/O Cable, HRS 12p/open, P
I/O cable with HRS 12p connector and open end.

Info
The cable is suitable for the following camera models:
Order Number | Cable Length |
2000026691 | 3 m |
2000026689 | 10 m |
Cable Drawing

Pin Number | Wire Color | Function |
1 | White | Opto In 1 - |
2 | Brown | Opto In 1 + |
3 | Green | Opto In 3 - |
4 | Yellow | Opto In 3 + |
5 | Gray | Opto I/O Ground |
6 | Blue | Opto Out 1 - |
7 | Red | Opto Out 1 + |
8 | Black | Opto In 2 - |
9 | Violet | Opto In 2 + |
10 | Pink | Not connected |
11 | Gray/Pink | Opto Out 2 - |
12 | Red/Blue | Opto Out 2 + |
Physical Specifications
| 2000022691 / 2000026689 |
Camera-Side Connector | Hirose, 12 pin [HR10A-10P-12S (73)] |
Host-Side Connector | None, open end |
Cable Cross-Section | 6 x 2 x 0.14 mm² (close to AWG 26) |
Cable Diameter | 7.1 mm |
Wire Insulation | PVC |
Outer Jacket | PVC |
Minimum Bending Radius | 42.6 mm (6 x cable diameter), fixed installation |
Maximum Bending Cycles | None (fixed installation only) |
Suitable for Drag Chain Applications | No |
Suitable for Robotics Applications | No |
Electrical Specifications
| 2000022691 / 2000026689 |
Maximum Operating Voltage | See camera documentation for the power requirements of your camera. |
Wire Resistance | ≤ 142 Ω/km |
Environmental Specifications
| 2000022691 / 2000026689 |
Operating Temperature Range | -25–80 °C, not moving |
Plug Specifications
| 2000022691 / 2000026689 |
Durability | >1000 mating cycles |
Contact Resistance | max. 10 mΩ |
Contact Plating | Silver |
Protection Rating | IP40 |
Plug Insulation Material | Polyamide/PBT |
Read the camera user's manual including the safety warnings before connecting the cable to the camera. The user's manual also contains further information about pin assignments, power requirements, as well as comprehensive information about installing and using the camera.
You can download the user's manual and related documents for your camera free of charge from the Basler website.