Skip to content

PLTransportLayer Class#

List of all parameter names available for pylon device transport layers

Inheritance Hierarchy#

System.Object
  Basler.Pylon.PLTransportLayer

Properties#

NameDescription
Public propertyStatic memberAreaTriggerMode

Sets the trigger mode of the area trigger signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberAutomaticFormatControl

Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberAutomaticROIControl

Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberBitAlignment

Sets the alignment of the bits in the output format.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberCommandDuplicationEnable

Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberConnectionGuardEnable

Enables the automatic start of the PylonGigEConnectionGuard.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberCorrectedErrorCount

Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberCustomBitShiftRight

User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberCxpLinkConfiguration

Sets the link configuration for the communication between the receiver and transmitter device.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberCxpTriggerPacketMode

Sets the trigger packet mode. This parameter allows you to send triggers on rising edges only. It can be used for extreme trigger rates. This parameter may violate the CXP standard.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceAccessStatus

Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceDisplayName

User-friendly name of the device.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceEndianessMechanism

Sets the endianness handling mode.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceID

Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceManufacturerInfo

Additional information about the manufacturer of the device.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberDeviceModelName

Name of the device model. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberDeviceSerialNumber

Serial number of the remote device. This value only changes when the Device Update List command is executed.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceType

Returns the transport layer of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberDeviceVendorName

Name of the device vendor. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberEventAcquisitionTrigger

AcquisitionTrigger

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventAcquisitionTriggerSoftCounter

Software counter for event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventAcquisitionTriggerTimestamp

Timestamp of event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventDeviceLost

Returns the unique Identifier of the Device Lost event.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventDeviceLostSoftCounter

Software counter for event 'DeviceLost'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferEnd

FrameTransferEnd

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferEndSoftCounter

Software counter for event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferEndTimestamp

Timestamp of event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferStart

FrameTransferStart

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferStartSoftCounter

Software counter for event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTransferStartTimestamp

Timestamp of event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTriggerMissed

FrameTriggerMissed

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTriggerMissedSoftCounter

Software counter for event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventFrameTriggerMissedTimestamp

Timestamp of event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventNotification

Sets whether the host application is notified of the selected event.

Applies to: CoaXPress and blaze

Visibility: Expert

Selected by: EventSelector

The feature documentation may provide more information.

Public propertyStatic memberEventOverflow

Overflow

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowFrameId

Camera FrameID

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowIsComplete

Frame Is Complete

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowIsLost

Frame Is Lost

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowIsTruncated

Frame Is Truncated

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowSoftCounter

Software counter for event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventOverflowTimestamp

Timestamp of event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventSelector

Sets which event to signal to the host application.

Applies to: CoaXPress and blaze

Visibility: Expert

Selecting Parameters: EventNotification

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerExceededPeriodLimits

TriggerExceededPeriodLimits

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerExceededPeriodLimitsSoftCounter

Software counter for event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerExceededPeriodLimitsTimestamp

Timestamp of event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOff

TriggerQueueFilllevelThresholdOff

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOffSoftCounter

Software counter for event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOffTimestamp

Timestamp of event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOn

TriggerQueueFilllevelThresholdOn

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOnSoftCounter

Software counter for event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberEventTriggerQueueFilllevelThresholdOnTimestamp

Timestamp of event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberFillLevel

Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberFormat

Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberFrontGPI

Current input signal levels of all front GPI inputs (bit mask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberGentlInfoIgnorefgformat

Ignore the FG output format and manage it internally in the GenTL producer

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberGentlInfoVersion

Version of the GenTL description Interface in the applet.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberGevDeviceGateway

Current gateway IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberGevDeviceIPAddress

Current IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberGevDeviceMACAddress

48-bit MAC address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberGevDeviceSubnetMask

Current subnet mask of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberGPI

Current input signal levels of all GPI inputs (Bitmask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberHeartbeatTimeout

Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberHeight

Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberImageSelect

Defines which image in a sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberImageSelectPeriod

Select the length of an image sequence. Only a single image of the sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLinkCommandRetryCount

Specifies maximum number of tries before failing the control channel commands.

Applies to: blaze

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberLinkCommandTimeout

Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberLutCustomFile

Filename with custom lookup table values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutEnable

Switch the LUT and processing functionality on or off.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutImplementationType

Type of LUT implementation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutInputPixelBitDepth

Pixel bit depth at LUT input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutOutputPixelBitDepth

Pixel bit depth at LUT output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutSaveFile

Save current LUT configuration.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutType

Enables the LUT to be loaded with custom values or uses the applet's processor.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValue

Field with LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueBlue

Field with blue LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueBlueSelector

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueGreen

Field with green LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueGreenSelector

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueRed

Field with red LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueRedSelector

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberLutValueSelector

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberMaxRetryCountRead

Maximum number of retries for read operations after a read operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberMaxRetryCountWrite

Maximum number of retries for write operations after a write operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberMigrationModeEnable

Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only.

Applies to: GigE and USB

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberMissingCameraFrameResponse

Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberMissingCameraFrameResponseClear

Clears the Missing Camera Frame Response parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOffsetX

X-offset of the acquisition ROI independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOffsetY

Y-offset of the acquisition ROI independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOutputPackedFormats

Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOverflow

Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOverflowEventSelect

An overflow event can be generated on each incomplete, lost or correct frame. It is possible to select all permutations of these three events to be reported via overflow event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOverflowOffThreshold

Overflow handling will be inactive once the buffer filllevel is below this Value.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOverflowOnThreshold

Overflow handling will be active once the buffer filllevel is above this Value. Frames will be interrupted.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberOverflowSyncOnThreshold

Overflow handling will be active once the buffer filllevel is above this Value, after the currently active frame is completed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberPacketTagErrorCount

Number of packet errors. This parameter indicates that CXP stream packets are lost.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberPixelDepth

Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberPixelFormat

Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberProcessingGain

Gain correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberProcessingGamma

Gamma correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberProcessingInvert

Invert output. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberProcessingOffset

Offset correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberReadTimeout

Read access timeout value in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberScalingFactorBlue

Blue gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberScalingFactorGreen

Green gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberScalingFactorRed

Red gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSendSoftwareTrigger

Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSensorHeight

Sensor Height in selected tap geometry. Value is ignored if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSensorWidth

Sensor width in selected tap geometry. Value is ignored if vantage point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSoftwareTriggerIsBusy

Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSoftwareTriggerQueueFillLevel

Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Last_Error_Status

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Last_Error_Status_Text

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Read_Operations_Failed_Count

Number of failed read operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Read_Pipe_Reset_Count

Number of read pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Write_Operations_Failed_Count

Number of failed write operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatistic_Write_Pipe_Reset_Count

Number of write pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStatisticReadWriteTimeoutCount

Number of timeouts during read and write operations when waiting for a response from the device.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

Public propertyStatic memberStreamDisplayName

User-friendly name of the selected stream.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberStreamID

Device-wide unique ID of the data stream.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selected by: StreamSelector

The feature documentation may provide more information.

Public propertyStatic memberStreamSelector

Sets the stream channel. The parameter is 0-based in order to match the index of the C interface.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selecting Parameters: StreamID

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorByteAlignment8b10bLocked

Byte Alignment 8b10b locked

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorChannelCurrent

Returns the Channel Current.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorChannelCurrentSelector

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorChannelVoltage

Returns the Channel Voltage.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorChannelVoltageSelector

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorCurrentLinkSpeed

Returns the current PCIe link speed in Gibibyte (2^30 byte).

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorCxpImageLineMode

This parameter informs on the current transfer mode, used by the camera. The transfer can be an areascan (= 0) or linescan (= 1) image.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorDisparity8b10bError

Disparity 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorExternalPower

Shows the external power state of the board.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorFpgaTemperature

Returns the current FPGA die temperature.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorFpgaVccAux

Returns the current FPGA auxiliary Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorFpgaVccBram

Returns the current FPGA BRAM Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorFpgaVccInt

Returns the current FPGA internal Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorNotInTable8b10bError

Not in table 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPacketbufferOverflowCount

Represents the number of overflows, if an overflow occurred due to not correctly aligned package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPacketbufferOverflowSource

Represents the port, which has overflows due to not correctly aligned package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPcieTrainedPayloadSize

Returns the PCIe trained payload size.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPcieTrainedRequestSize

Returns the PCIe trained request size.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPortBitRate

Returns the port bit rate

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorPowerOverCxpState

Shows the current power over CXP state.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

Public propertyStatic memberSystemmonitorUsedCxpConnections

The currently used number of CXP ports used in this process.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerAcknowledgementCount

Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerCameraOutSelect

Sets the output source to be connected to a camera signal channel.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerEventCount

Number of trigger events sent to the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerExceededPeriodLimits

Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerExceededPeriodLimitsClear

Clears the Trigger Exceeded Period Limits parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInDebounce

Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInDownscale

Factor by which the trigger input signal is downscaled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInDownscalePhase

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInPolarity

Sets the polarity of the trigger input signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInSource

Sets the trigger input source for external trigger mode.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsFrequency

Current frequency of the input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsMaximumFrequency

Maximum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsMinimumFrequency

Minimum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsMinMaxFrequencyClear

Clears the minimum and maximum frequency values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsPolarity

Sets the polarity of the trigger input signal for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsPulseCount

Number of input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsPulseCountClear

Clears the input signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerInStatisticsSource

Sets the trigger input source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerMultiplyPulses

Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutputEventSelect

Select the pulse form generator for event monitoring.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutputFrequency

Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectFrontGPO0

Sets the output source of Front GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectFrontGPO1

Sets the output source of Front GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO0

Sets the output source of GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO1

Sets the output source of GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO2

Sets the output source of GPO 2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO3

Sets the output source of GPO 3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO4

Sets the output source of GPO 4.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO5

Sets the output source of GPO 5.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO6

Sets the output source of GPO 6.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutSelectGPO7

Sets the output source of GPO 7.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutStatisticsPulseCount

Number of output pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutStatisticsPulseCountClear

Clears the output signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerOutStatisticsSource

Sets the output source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator0Delay

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator0Downscale

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator0DownscalePhase

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator0Width

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator1Delay

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator1Downscale

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator1DownscalePhase

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator1Width

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator2Delay

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator2Downscale

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator2DownscalePhase

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator2Width

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator3Delay

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator3Downscale

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator3DownscalePhase

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerPulseFormGenerator3Width

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerQueueFillLevel

Fill level of the trigger queue.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerQueueFillLevelEventOffThreshold

Set the threshold for generating a queue fill level OFF event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerQueueFillLevelEventOnThreshold

Set the threshold for generating a queue fill level ON event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerQueueMode

Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerState

Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberTriggerWaveViolation

Indicates a distance of two trigger edges violating the minimum edge frequency.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberUncorrectedErrorCount

Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberVantagePoint

Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight the Height + YOffset must be smaller than SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberWidth

Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

Public propertyStatic memberWriteTimeout

Write access timeout in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

 

PLTransportLayer.AreaTriggerMode Property#

Sets the trigger mode of the area trigger signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AutomaticFormatControl Property#

Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AutomaticROIControl Property#

Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.BitAlignment Property#

Sets the alignment of the bits in the output format.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CommandDuplicationEnable Property#

Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.ConnectionGuardEnable Property#

Enables the automatic start of the PylonGigEConnectionGuard.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.CorrectedErrorCount Property#

Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomBitShiftRight Property#

User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkConfiguration Property#

Sets the link configuration for the communication between the receiver and transmitter device.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.CxpTriggerPacketMode Property#

Sets the trigger packet mode. This parameter allows you to send triggers on rising edges only. It can be used for extreme trigger rates. This parameter may violate the CXP standard.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceAccessStatus Property#

Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceDisplayName Property#

User-friendly name of the device.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceEndianessMechanism Property#

Sets the endianness handling mode.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceID Property#

Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceManufacturerInfo Property#

Additional information about the manufacturer of the device.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.DeviceModelName Property#

Name of the device model. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.DeviceSerialNumber Property#

Serial number of the remote device. This value only changes when the Device Update List command is executed.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceType Property#

Returns the transport layer of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceVendorName Property#

Name of the device vendor. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTrigger Property#

AcquisitionTrigger

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTriggerSoftCounter Property#

Software counter for event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTriggerTimestamp Property#

Timestamp of event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventDeviceLost Property#

Returns the unique Identifier of the Device Lost event.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventDeviceLostSoftCounter Property#

Software counter for event 'DeviceLost'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEnd Property#

FrameTransferEnd

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEndSoftCounter Property#

Software counter for event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEndTimestamp Property#

Timestamp of event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStart Property#

FrameTransferStart

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStartSoftCounter Property#

Software counter for event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStartTimestamp Property#

Timestamp of event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissed Property#

FrameTriggerMissed

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissedSoftCounter Property#

Software counter for event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissedTimestamp Property#

Timestamp of event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventNotification Property#

Sets whether the host application is notified of the selected event.

Applies to: CoaXPress and blaze

Visibility: Expert

Selected by: EventSelector

The feature documentation may provide more information.

PLTransportLayer.EventOverflow Property#

Overflow

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowFrameId Property#

Camera FrameID

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsComplete Property#

Frame Is Complete

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsLost Property#

Frame Is Lost

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsTruncated Property#

Frame Is Truncated

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowSoftCounter Property#

Software counter for event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowTimestamp Property#

Timestamp of event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventSelector Property#

Sets which event to signal to the host application.

Applies to: CoaXPress and blaze

Visibility: Expert

Selecting Parameters: EventNotification

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimits Property#

TriggerExceededPeriodLimits

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimitsSoftCounter Property#

Software counter for event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimitsTimestamp Property#

Timestamp of event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOff Property#

TriggerQueueFilllevelThresholdOff

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOffSoftCounter Property#

Software counter for event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOffTimestamp Property#

Timestamp of event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOn Property#

TriggerQueueFilllevelThresholdOn

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOnSoftCounter Property#

Software counter for event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOnTimestamp Property#

Timestamp of event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FillLevel Property#

Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Format Property#

Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FrontGPI Property#

Current input signal levels of all front GPI inputs (bit mask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GentlInfoIgnorefgformat Property#

Ignore the FG output format and manage it internally in the GenTL producer

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.GentlInfoVersion Property#

Version of the GenTL description Interface in the applet.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.GevDeviceGateway Property#

Current gateway IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceIPAddress Property#

Current IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceMACAddress Property#

48-bit MAC address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceSubnetMask Property#

Current subnet mask of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GPI Property#

Current input signal levels of all GPI inputs (Bitmask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.HeartbeatTimeout Property#

Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.Height Property#

Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageSelect Property#

Defines which image in a sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageSelectPeriod Property#

Select the length of an image sequence. Only a single image of the sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LinkCommandRetryCount Property#

Specifies maximum number of tries before failing the control channel commands.

Applies to: blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.LinkCommandTimeout Property#

Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.LutCustomFile Property#

Filename with custom lookup table values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutEnable Property#

Switch the LUT and processing functionality on or off.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutImplementationType Property#

Type of LUT implementation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutInputPixelBitDepth Property#

Pixel bit depth at LUT input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutOutputPixelBitDepth Property#

Pixel bit depth at LUT output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutSaveFile Property#

Save current LUT configuration.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutType Property#

Enables the LUT to be loaded with custom values or uses the applet's processor.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValue Property#

Field with LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueBlue Property#

Field with blue LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueBlueSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueGreen Property#

Field with green LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueGreenSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueRed Property#

Field with red LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueRedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.MaxRetryCountRead Property#

Maximum number of retries for read operations after a read operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MaxRetryCountWrite Property#

Maximum number of retries for write operations after a write operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MigrationModeEnable Property#

Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only.

Applies to: GigE and USB

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MissingCameraFrameResponse Property#

Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.MissingCameraFrameResponseClear Property#

Clears the Missing Camera Frame Response parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OffsetX Property#

X-offset of the acquisition ROI independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OffsetY Property#

Y-offset of the acquisition ROI independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OutputPackedFormats Property#

Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Overflow Property#

Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowEventSelect Property#

An overflow event can be generated on each incomplete, lost or correct frame. It is possible to select all permutations of these three events to be reported via overflow event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowOffThreshold Property#

Overflow handling will be inactive once the buffer filllevel is below this Value.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowOnThreshold Property#

Overflow handling will be active once the buffer filllevel is above this Value. Frames will be interrupted.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowSyncOnThreshold Property#

Overflow handling will be active once the buffer filllevel is above this Value, after the currently active frame is completed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PacketTagErrorCount Property#

Number of packet errors. This parameter indicates that CXP stream packets are lost.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PixelDepth Property#

Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PixelFormat Property#

Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingGain Property#

Gain correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingGamma Property#

Gamma correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingInvert Property#

Invert output. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingOffset Property#

Offset correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ReadTimeout Property#

Read access timeout value in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorBlue Property#

Blue gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorGreen Property#

Green gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorRed Property#

Red gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SendSoftwareTrigger Property#

Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SensorHeight Property#

Sensor Height in selected tap geometry. Value is ignored if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SensorWidth Property#

Sensor width in selected tap geometry. Value is ignored if vantage point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SoftwareTriggerIsBusy Property#

Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SoftwareTriggerQueueFillLevel Property#

Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StatisticReadWriteTimeoutCount Property#

Number of timeouts during read and write operations when waiting for a response from the device.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.Statistic_Last_Error_Status Property#

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Last_Error_Status_Text Property#

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Read_Operations_Failed_Count Property#

Number of failed read operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Read_Pipe_Reset_Count Property#

Number of read pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Write_Operations_Failed_Count Property#

Number of failed write operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Write_Pipe_Reset_Count Property#

Number of write pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StreamDisplayName Property#

User-friendly name of the selected stream.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StreamID Property#

Device-wide unique ID of the data stream.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selected by: StreamSelector

The feature documentation may provide more information.

PLTransportLayer.StreamSelector Property#

Sets the stream channel. The parameter is 0-based in order to match the index of the C interface.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selecting Parameters: StreamID

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorByteAlignment8b10bLocked Property#

Byte Alignment 8b10b locked

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelCurrent Property#

Returns the Channel Current.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelCurrentSelector Property#

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelVoltage Property#

Returns the Channel Voltage.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelVoltageSelector Property#

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCurrentLinkSpeed Property#

Returns the current PCIe link speed in Gibibyte (2^30 byte).

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCxpImageLineMode Property#

This parameter informs on the current transfer mode, used by the camera. The transfer can be an areascan (= 0) or linescan (= 1) image.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorDisparity8b10bError Property#

Disparity 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorExternalPower Property#

Shows the external power state of the board.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaTemperature Property#

Returns the current FPGA die temperature.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccAux Property#

Returns the current FPGA auxiliary Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccBram Property#

Returns the current FPGA BRAM Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccInt Property#

Returns the current FPGA internal Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorNotInTable8b10bError Property#

Not in table 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPacketbufferOverflowCount Property#

Represents the number of overflows, if an overflow occurred due to not correctly aligned package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPacketbufferOverflowSource Property#

Represents the port, which has overflows due to not correctly aligned package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPcieTrainedPayloadSize Property#

Returns the PCIe trained payload size.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPcieTrainedRequestSize Property#

Returns the PCIe trained request size.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPortBitRate Property#

Returns the port bit rate

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPowerOverCxpState Property#

Shows the current power over CXP state.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorUsedCxpConnections Property#

The currently used number of CXP ports used in this process.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerAcknowledgementCount Property#

Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerCameraOutSelect Property#

Sets the output source to be connected to a camera signal channel.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerEventCount Property#

Number of trigger events sent to the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerExceededPeriodLimits Property#

Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerExceededPeriodLimitsClear Property#

Clears the Trigger Exceeded Period Limits parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDebounce Property#

Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDownscale Property#

Factor by which the trigger input signal is downscaled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInPolarity Property#

Sets the polarity of the trigger input signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInSource Property#

Sets the trigger input source for external trigger mode.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsFrequency Property#

Current frequency of the input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMaximumFrequency Property#

Maximum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMinimumFrequency Property#

Minimum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMinMaxFrequencyClear Property#

Clears the minimum and maximum frequency values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPolarity Property#

Sets the polarity of the trigger input signal for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPulseCount Property#

Number of input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPulseCountClear Property#

Clears the input signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsSource Property#

Sets the trigger input source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerMultiplyPulses Property#

Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutputEventSelect Property#

Select the pulse form generator for event monitoring.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutputFrequency Property#

Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO0 Property#

Sets the output source of Front GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO1 Property#

Sets the output source of Front GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO0 Property#

Sets the output source of GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO1 Property#

Sets the output source of GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO2 Property#

Sets the output source of GPO 2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO3 Property#

Sets the output source of GPO 3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO4 Property#

Sets the output source of GPO 4.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO5 Property#

Sets the output source of GPO 5.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO6 Property#

Sets the output source of GPO 6.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO7 Property#

Sets the output source of GPO 7.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsPulseCount Property#

Number of output pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsPulseCountClear Property#

Clears the output signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsSource Property#

Sets the output source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevel Property#

Fill level of the trigger queue.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevelEventOffThreshold Property#

Set the threshold for generating a queue fill level OFF event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevelEventOnThreshold Property#

Set the threshold for generating a queue fill level ON event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueMode Property#

Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerState Property#

Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerWaveViolation Property#

Indicates a distance of two trigger edges violating the minimum edge frequency.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.UncorrectedErrorCount Property#

Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.VantagePoint Property#

Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight the Height + YOffset must be smaller than SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Width Property#

Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.WriteTimeout Property#

Write access timeout in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.